One at the center intersection of each structural cup. This eliminates any flat areas which are weak spots in early designs
地板底部独特设计的20个凸起,解决了以前平板区域相对薄弱的特点,增强了地板整体的极限承载能力。
60 Perimeter Welds as compared
to 40 in earlier designs
All Huili panels have 15 welds along each perimeter edge: a 50% increase, and a total of 20 extra welds around the entire panel perimeter. The additional 20 welds dramatically improve edge load capabilities, and overall panel durability.
所有“汇丽”活动地板的边角部位都有总共60个焊点,比普通地板的40个焊点多出50%,大大增强了地板边缘的承载能力。
Huili’s Answer to Warped Panels
After welding, each Huili panel is put into a flattening press and checked for flatness.
Huilian is the only company to go this extra mile in order to guarantee a super flat panel.
选用足够厚度的优质钢板,在冲压和焊接后都必须进行整形处理,使得地板保证足够的平整度。
High Strength Corners
Huili panels come with 90 degree deep drawn steel beam corners, filled with high strength cement. Any load placed on the panel will be transferred to the panel corners before traveling through the pedestals to the sub-floor.
Though Huajing deep drawn beam corner is a difficult manufacturing process, it is done in order to achieve the ultimate loading capacity necessary to prevent bending upwards of corners or dishing panels.
Cement is filled using a high pressured pump to ensure that sufficient cement mix reaches all corners of the panel.
Close attention should be paid to the strength of the corner areas of the panel as it is the ultimate determinant of an excellent raise floor system.
“汇丽”采用高级拉伸钢板进行垂直拉伸,并以高强度发泡水泥填充,使得全钢地板的角落坚硬无比,能够很好的承载重力,并有效传导到支撑系统上。
当您挑选全钢活动地板时,请务必仔细检查边角的拉伸和成型状况,这是地板有效承载高强度载荷的关键。
Ultimate Load Capacity
Ultimate load capacity is defined as the point at which panel failure occurs. Such failure might cause human injury or massive equipment damage.
In order to prevent such injury or damage from occurring, Huajing panels are designed and built to a minimum safety factor of 2.5. (ie. A 1000lbs rated panel must be able to support a minimum of 2500lbs before failure occurs.)
极限载荷是指作用在地板表面任何一点导致地板永久损坏的破坏作用力。这点意味着潜在的可能伤人或损毁设备的zui低作用力。极限载荷的好坏是地板承载能力的主要内容。
“汇丽”独特的结构设计保证地板的极限载荷zui少2.5倍于集中载荷。这意味着FS1000(450公斤级)的地板zui少可以承载1125公斤的点载荷而不会损毁,均布载荷更是超过2000公斤/平方米。